These instructions were made using a Samsung SmartThings Motion Sensor v1
1. Pair the Samsung SmartThings Motion sensor to Hubitat
2. Rename the Sensor to something descriptive to where you have it placed
3. Click on Apps
4. Click on Add Built-In App button
5. Scroll Down and click on Hubitat Safety Monitor
6. Click on Done to install the Safety Monitor
7. Click on Hubitat Safety Monitor
8. Click on Intrusion-Away
9. Click on Motion Sensors
10. Click box beside Samsung Smartthings Motion Sensor
11. Click on update
12. Enter custom message to send
13. Enter phone number as shown on screen
14. Press Tab key
15. Click on Done
16. Click on Light Alerts
17. Click on Lights to flash
18. Check box beside the light you want to flash
19. Click on update
20. Click on Done
21. Click on Done
How to reset the SmartThings Motion Sensor
If the SmartThings Motion Sensor didn’t connect to the Hub when you removed the pull-tab, reset and connect the device manually.
• If the product sticker on the back says “Samsung SmartThings”:
22. Remove the cover
23. Hold the connect button for five (5) seconds
24. Release the button when the LED starts blinking red
• If the product sticker on the back does not say “Samsung SmartThings”:
• If the device has one cell battery (CR2450):
25. Remove the battery
26. Hold the button while reinserting the battery
27. Release the button when the LED lights up
• If the device has two AAAA batteries:
28. Hold the button until the LED turns off (about 6 seconds)
================================================
*** Show Notes, Links and Resources ****
Here are the items mentioned in this video –
Hubitat Hub
https://hubitat.com/products
Samsung SmartThings Motion Sensor
https://amzn.to/2EWsG8I
➥➥➥ SUBSCRIBE FOR MORE VIDEOS ➥➥➥
Never miss a video about creating your own smart home
Subscribe ⇢ http://ronaldnutter.com/subscribe
To listen to an audio version of this episode while trying, TechBytes with Ron Nutter is available on iTunes, Google Podcasts, Stitcher and TuneIn. Go to TechByteswithRonNutter.com to subscribe today!
To subscribe to the TechbytesRN newsletter, click here – http://ronaldnutter.com/sample1
In return for subscribing to the newsletter, I will send you a chapter from my first DIY Smart Home Guide Book.
Visit http://www.ronaldnutter.com to see all the books Ron has written
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
*===============================*
Become a Patreon supporter
https://www.patreon.com/techbytesrn
*===============================*
#TechBytesRN #hubitatinc #Zigbee #Zwave #smarthome #IoT #samsung #smartthings
Podcast: Play in new window | Download
Subscribe: Apple Podcasts | TuneIn | RSS